507 Mechanical Movements

33

Pumps, water wheels and water-raising machines

Overshot, undershot and breast wheels, turbines, Barker's mill, lift and force pumps, the Archimedean screw and hydraulic ram from Brown's 1868 book, simulated.

Brown has a long run of movements for using water as power and for lifting it. His index groups them under water wheels, pumps and water-raising machines:

  • water wheels, Nos. 430 to 438: overshot, undershot and breast wheels, turbines and Barker's mill;
  • water-raising machines, Nos. 439, 441 to 444 and 457 to 461: buckets, the Persian wheel, the Archimedean screw, the hydraulic ram and the well sweep;
  • pumps, Nos. 448 to 456, 462, 465 and 473, and bilge ejectors, Nos. 475 and 476.

The simulations treat water in one of two simplified ways, and each page says which:

  • In the water wheels and current-driven wheels, water is a stream of particles that strikes the floats or fills the buckets.
  • In most pumps, each chamber or pipe is a “lumped” volume of water whose level and pressure are tracked, rather than individual particles.

A few models, such as the wind-driven well lift (No. 459), use MuJoCo's air model instead. Each machine has a single driven input: a stream, a crank, a lever worked by hand, or wind.

No. 430, Overshot water wheel: the physics simulation, driven only at its input.

The 33 working models

Sources