507 Mechanical Movements

9

Mangle wheels and racks

How a mangle wheel turns back and forth while its pinion turns one way. Brown's five mangle wheels and three mangle racks, simulated with real gear contact.

A mangle wheel turns first one way, then the other, while its pinion keeps turning in one direction. The pinion runs round one side of a ring of teeth and then passes through a gap to the other side, which reverses the wheel. For the pinion to cross over, its shaft has to move in a slot, in most designs steered by a groove.

Brown's index lists five mangle wheels (Nos. 36, 192, 193, 194 and 371) and three mangle racks (Nos. 197, 198 and 199). The racks use the same trick to move a frame back and forth in a straight line. The variations are worth comparing:

  • No. 193 has two circles of teeth, so the wheel turns more slowly one way than the other. Brown puts this down to “the greater radius of the outer circle of teeth”.
  • No. 371 is toothed on both faces.
  • In No. 198 the rack lifts instead of the pinion.
  • No. 54 is filed under face gearing in the index, but Brown's text calls it a “Mangle or star-wheel”, so it is included here.

In each model the pinion is the only driven part. The wheel or rack moves only because the teeth collide, and where the pinion has to cross from one side of the teeth to the other, a real groove steers its shaft rather than a script.

No. 36, Mangle wheel and pinion: the physics simulation, driven only at its input.

The 9 working models

Notes on membership

  • No. 198: Listed in Brown's index under Rack, mangle.

Sources